BIGGER provides you with the knowledge of environmentally friendly adhesive.
Spray glue is widely used in all kinds of goods in life.BIGGER has always been committed to providing professional environmentally friendly spray glue to its customers.In order to make your customers better use BIGGER adhesive products, BIGGER environmental protection spray adhesive for you to summarize a comprehensive knowledge of adhesive.
1.The curing temperature should not be too high or too low to avoid over-curing or under-curing.
2.Curing time should be strictly controlled, not long, not short.
3.Cool slowly after heating and curing, do not rush to take out the adhesive.
4.The oil on the sticky surface is clean, it should be degreased first and then polished in degreasing.
5.The solvents used for degreasing and the abrasives used for fabric and sandblasting should be replaced timely so as not to affect the treatment effect.
6.The surface roughness is appropriate, not excessive.
7.After surface treatment, the parking time should not be too long, and it should be glued as soon as possible.
8.Glued surface before coating to proper preheat (30 to 40 ℃.
9.Do not use adhesive over storage and application periods.
10.If there is stratification and precipitation of water spray adhesive in a single part, it should be stirred evenly before use.
11.Multi-component water-based spray adhesive should be proportioned and mixed uniformly.
12.Do not use simple docking, non-docking bonding measures, should take appropriate strengthening measures.
13.Solvent - based adhesive coating thickness should be fully airing, but not excessive.
14.Try to use lap, oblique, socket, mixed connection.
15.The lap length should not be too long.
16.Adhesive laminate materials do not use lap, but oblique.
17.Add screw and willow, roll the edge wrap Angle, prevent stripping.
18.The amount of degreasing solvent should not be too large to prevent the condensation of moisture in the air surface and reduce the bonding strength.
19.Sofa spray glue, sponge spray glue and so on besmear glue quantity not too big, glue layer appropriate thin not thick, but want to ensure not lack glue.
20.Adhesive viscosity should not be too large, can be heated or diluted to reduce the viscosity.
21.Mounting clamping pressure is sufficient, too large or too small is not appropriate.
22.Choose the adhesive that is suitable for its use, before use, must have enough time at room temperature.
23.Give attention to adhesive strength and durability to choose the appropriate adhesive.
24.The heating curing adhesive should be gelatinized at room temperature first to prevent the flow and lack of glue.
25.Heat curing to step temperature, not too fast, uniform temperature.
26.Pressure should not be too early, pressure should be divided into sections, pressure should be even.
27.After curing as much as possible to eliminate internal stress.
28.Strengthen inspection of appearance and performance of adhesive products.
GUANGDONG ORIENT YIGE NEW MATERIAL Co.,LTD, specializes in all kinds of sofa spray glue, sponge spray glue, mattress spray glue, water based spray glue, clean taste spray glue and other environmental protection spray glue.These are all environmentally friendly adhesives. BIGGER has been fighting back inferior raw materials, insisting on the use of imported rubber, environmental protection heat resistant resin, environmental protection solvents, high-quality flame retardant materials and special additives.The product is non-toxic, small smell, strong adhesion performance, good flame retardant performance, high temperature resistance, not easy to powder, easy to spray, easy to operate.
Welcome all major manufacturers to consult and cooperate.