Common Furniture Adhesive Questions and Answers

         From the name analysis, the spraying process of Furniture Adhesive is the process of spraying the glue onto the corresponding material. This method does not seem to be difficult to operate, but it is often caused by the wrong use method for new users problem. Furniture Adhesive manufacturers, with more than 20 years of adhesive R & D and production, have summarized answers to common spray coating problems.

        Why is there a problem of poor spraying effect during the use of Furniture Adhesive? The general reason is mostly because the spray gun nozzle and the type of spray glue used are inconsistent, which will easily lead to insufficient air pressure, which will cause moisture in the compressor, and the continuous connection will cause the spray gun and the bonded material to be stuck because the spraying distance is too far, resulting in stick The connecting material is uneven.        The general solution to this situation is to select and use a spray gun nozzle of the same spray type, and then adjust the amount and direction of the spray gun. The pressure needs to be kept above 4 kg as much as possible, and the air in the compressor needs to be kept dry. The distance between the spray gun and the material to be bonded needs to be kept within the range of 30 to 80 cm, so that the bonding material can be kept flat.