Do you understand the most standard use of BIGGER super adhesive?
BIGGER super adhesive can be compatible with different materials and is not affected by the environment. It can work in water, instead of anti-mould glue, which has the advantages of fast curing, rapid positioning and smooth extrusion.There are two kinds of packaging for all-purpose glue, 300ML and 50ML respectively.
The following is to introduce you to the standard use step, only 4 steps can be easily adhered to.
- Clean the surface of the substrate first, remove grease spots, stains, dust, etc.
- Cut the sides of the glue into 45 degrees.This is the best way to seal the edges.
- Beat the glue;Slowly pull the gun, side light hand out glue, edge pull tape;When the edge is closed, gently press with the glue mouth.
- You can use it directly, as long as you don't touch the glue before curing it.
- The substrate itself must be cleaned.
- The base material should not be wet when glue;The gums should be cut in 45 degrees.
- After the glue is finished, do not touch the glue immediately, so as not to remove the tape.
- The base material itself contains too much water also can let the glue have shift situation.
- The general curing time is 24 hours.