From the name analysis, the spraying process of Furniture Adhesive is the process of spraying the glue onto the corresponding material. This method does not seem to be difficult to operate, but it is often caused by the wrong use method for new users problem. Furniture Adhesive manufacturers, with more than 20 year...

       Hot melt adhesive is an adhesive with strong plasticity. It has strong initial viscosity and a general odor of light rosin resin. It has a wide bonding range and can be bonded to many materials. So easy to use Hot melt adhesive has What should be paid attention to?       ...

The temperature of the Water Based Wood Coating and the surface to be coated must be consistent. Do not paint on cold wood. It can be applied and dried in the sun, but avoid painting on hot surfaces. The construction conditions of Water Based Wood Coating are generally 10–30°C. Excessively high or low temperatures may lead to poor coat...

1. According to its composition, it can be divided into polysulfide rubber, neoprene, acrylic, polyurethane, butyl rubber, silicone rubber, rubber-plastic composite, thermoplastic elastomer, etc. Construction Adhesive; 2. If it is divided according to the construction form, it can be divided into hot coating type, cold coating type, curing react...

For the preservation and use of PU glue, the best storage environment temperature for PU glue is generally 15℃-25℃, and the humidity needs to be less than 65%. If the temperature is too high, the curing agent will undergo a self-polymerization reaction, thereby accelerating the self-polymerization at a high temperature, then it will be easy to p...